Description

2 x 6SN7gt Sylvania Tubes Made in USA 2 holes per Grey plate Etched codes on top are J8M & I8M = 1948 Ask any questions before buying, not after Tested on Enhanced Triplet E3444 Laboratory Tester Results= 2070/1840 micromhos @ 6.7/5.3 mA - missing guide pin 1840/2060 micromhos @ 4.3/4.2 mA Bogey (100% or New) = 2600/2600 micromhos @ 9.0/9.0 mA +/- 10% The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us. The test conditions for this listing are __ 250 _Volts plate, __ 250 _Volts screen, ___ -8.0 ___Volts bias or Cathode resistance * What were your tubes tested at? I do combine S&H